FT Tiny Trainer Assembly Guide

13
THE BUILD FUSELAGE
MAKE YOUR SPACER DISKS
1. Pop out the Spacer Disks.
2. Remove the excess foam from the Spacer Disks (Illustration 5).
3. Place a bead of glue in the space between the foam.
4. Then glue your Coffee Stirrer sandwiched between the foam (Illustration 6).
5. Repeat the process with the second spacer disk, leaving some space between
them (Illustration 7).
6. After both disks dry, use your Small Knife to cut the excess flesh from the Coffee
Stirrer (Illustration 8).