Datasheet

Imaging IR Thermometer
P/N: TG165
© 2014, FLIR Systems, Inc.
#TG165; r. /16628; en-US
Description FLIR’s new TG165 Imaging IR Thermometer
bridges the gap between single spot IR
thermometers and FLIR’s legendary thermal
cameras. Equipped with FLIR’s exclusive
Lepton™ micro thermal camera, the TG165
shows you where potential problems are brewing
and where to aim your spot.
The TG165 lets you see heat patterns, reliably
measure temperature, and store images and
data. Its menu uses intuitive icons, making it
simple to operate. The TG165 also makes
documentation easy by saving images you can
download from the micro-SD card or over a USB
connection and use for reports.
With a spot ratio of 24 to 1, dual laser pointers,
and a wide temperature range from 13°F to 716°F
(-25°C to 380°C), the TG165 helps you capture
reliable readings from safer distances.
• See the Heat™ and speed up troubleshooting
• Know where to measure temperature
• Grab and go simplicity—no special training
required
• Pocket portable to fit a crowded tool bag
• Rugged and reliable
IR Temperature Measurement
Basic Accuracy +/- 1.5% or 1.5°C
Basic Range
-25 to 380°C 14 to 716°F
Detailed Ranges & Accuracy
-25℃ to -10°C ±3°C (-13 to 14 ±5°F)
-10℃ to 0°C ±2.0°C (14 to 32 +/- 4°F)
0℃ to 380°C ±1.5°C or 1.5% whichever is
greater (32 to 716°F +/- 3% or 3°F whichever is
greater )
Emissivity 4 Pre-set Levels with custom adjustment 0.1 to
0.99
Dist. to Spot Ratio (D:S)
24:1
Measurement Resolution 0.1 °C / °F
Response Time 150 Milliseconds
Spectral Response
8 to 14μm
Lasers Dual diverging lasers, Indicate Temp
Measurement Area, activated by pulling the
trigger
Calibration Soft button multi-point by Authorized FLIR
Service Center
IR Temperature Merasurement Range
-25 to 380°C
IR Temperature Resolution
0.1°C
IR Temperature Response Time <150ms
IR Thermometer Measurement Acquisition
Continuous Scanning
Emissivity
4-presets / adjustable 0.1 to 0.99
IR Thermometer Spectral Range
8-14μm
Min Measurement Distance 26cm (10")
Thermal Imaging
2 (5)
www.flir.com