Datasheet

TA04-KIT
General description
Part number TA04-KIT
Part name Lithium Polymer Rechargeable Battery Kit
Kit description Rechargeable battery kit for the FLIR DM284
Imaging Multimeter with extended battery life
Kit contents The TA04-KIT includes a FLIR DM284
replacement battery door, an Li polymer
rechargeable battery, an AC charging adapter
with international AC inlet clips for wall outlets,
and a quick start guide. The following AC inlet
clips are included: North America, Europe, UK,
Australia, and Korea.
Battery
Type Li polymer rechargeable
Output
3.7 V, 3050 mA h, 11.3 W h
Battery life Approximately 30 hours constant use in DMM
mode or 11 hours constant use in IGM mode
Charge indicator LED Red/green
Charging adapter
Input
100–240 V AC, 50/60 Hz, 0.4 A maximum
Output 5 V, 2000 mA
General
Warranty 2 years limited
Certifications
Safety standards compliance CE EMC: EN 61326-1, EN 61000-3-2, EN 61000-
3-3 CE LVD (also CB): IEC 62133:2012 US/CAN
Safety: UL 1642 (cell), UL 2054 (pack)—UL File
Listing MH61622 FCC: FCC Part 15B IC
(Canada): ICES-003
Physical data
Dimensions (H × W × L) 15.5 cm × 12.8 cm × 8 cm (6.1 in. × 5.1 in. × 3.2
in.)
P/N: TA04-KIT
Copyright
© 2016, FLIR Systems, Inc.
All rights reserved worldwide. Names and marks
appearing herein are either registered trademarks
or trademarks of FLIR Systems and/or its
subsidiaries. All other trademarks, trade names or
company names referenced herein are used for
identification only and are the property of their
respective owners.
Document identity
Publ. No.: TA04-KIT
Release:
Commit: 38299
Language: en-US
Modified: 2016-11-14
Formatted: 2016-11-14
1 (2)