Installation Guide

S1JF4G
IP66 Outdoor Junction Box
www.irsecurity.com/pro
S1JF4G_INSTALLATION_DIAGRAM_EN_R1
Weight: 0.6Kg / 1.3lbs
SX8 Plastic
Anchor 4pcs
ST6X45 Tapping
Screw 4pcs
M6 Washer
4pcs
Allen Key
S3.0 1pcs
Rubber Plug 1 pcs
Junction Box 1pcs
M4x10 Stainless
Steel Screw 3pcs
Rubber Gasket 1pcs
Waterproof
Connector 1pcs
M4x10 Stainless
Steel Screw 3pcs
INSTALLATION - MICRO PT
PACKAGE CONTENTS
DIMENSIONS - MICRO PT (UNITS: mm)
Make sure to install in an area that
can support the total weight of the
camera and accessories.
the latest compatibility list.
If using conduit, you must use thread
seal tape to ensure a proper seal.
M4x18 Stainless Screw 4pcs
(pre-attached)
Mounting Plate (Included with Camera)
133.6
133.6
110.3
133.6
110.0
98.0
84.0
133.6
48.0
90.0
52.0
Conduit: G1/2” or M20 P=1.5
Micro PT supports ceiling mount
only. Wall mount available. See
www.irsecurity.com/pro for details.
SX8 Plastic
Anchor 4pcs
ST6X45 Tapping Screw +
M6 Washer 4pcs
Rubber Gasket 1pcs
(pre-attached)
Rubber Plug 1pcs
(pre-attached)
Ceiling