Quick Start Pin Moisture Meter with Bluetooth® Model MR55
Quick Start INTRODUCTION The latest versions of the detailed User Manual and Quick Start, with translations, are located on the http://support.flir.com web site (download tab). Please read these documents carefully before use. QUICK STEPS 1. Ensure that two fresh 1.5V ‘AA’ batteries are installed in the meter’s rear compartment. 2. Long press the Power button to switch the meter ON. The meter automatically switches OFF after 20 minutes (APO). 3.
METER DESCRIPTION 1. Temperature / RH sensors 2. Electrode pins 3. Backlit LCD 4. Data Hold / Transmit button 5. Worklight / Backlight button 6. Power ON-OFF button 7. Material group select and Temperature/RH button 8. Worklight 9. Battery compartment lock 10. Battery compartment Note: Protective pin cap not pictured. Note: QR code on back of meter provides website link to material group information for wood and building materials. #NAS100098; r.
FUNCTION BUTTONS Long press to power the meter ON/OFF HOLD Short press to freeze/unfreeze displayed readings (readings must be held before they can be transmitted via Bluetooth) Long press to transmit held reading to remotely connected device using Bluetooth Short press to switch worklight ON/OFF Long press to switch display backlight ON/OFF Short press to select a material group number (1~11) Long press to select ambient temperature or relative humidity display on lower left of screen DISPLAY DESCRIPTION
Wood 7 to 99% Building materials (Group 10) 1 to 99% Building materials (Group 11) 1 to 35% • Moisture readings are automatically temperature compensated • When testing wood, always insert the pins perpendicular to the wood’s fiber structure • Take a number of readings in several locations for the best representation of the moisture present • Material Groups 1~8 are for timber; Group 9 is for plywood and oriented strand board (OSB); Group 10 is for brick, cement screed, and concrete; Group 11 is for c
Customer Support Customer Support Telephone List: https://support.flir.com/contact Repair, Calibration, and Technical Support https://support.flir.com Three-Year Limited Warranty This product is protected by FLIR’s 3-Year Limited Warranty. Visit www.flir.com/testwarranty to read the 3-Year Limited Warranty document. #NAS100098; r.
Quick Start Website last page http://www.flir.com Customer support http://support.flir.com Copyright © 2021, FLIR Systems, Inc. All rights reserved worldwide. Disclaimer Specifications subject to change without further notice. Models and accessories subject to regional market considerations. License procedures may apply. Products described herein may be subject to US Export Regulations. Please refer to exportquestions@flir.com with any questions. Publ. No.
