Data Sheet
Table Of Contents
- 1 Advisories
- 2 Introduction
- 3 Safety
- 4 Descriptions
- 5 User Interface Menus
- 6 Powering the MR277
- 7 Moisture Measurement Operation
- 8 Thermal and Visible Camera Operation
- 9 Ambient Temperature and Humidity Measurements
- 10 Capturing and Working with Screen Captures
- 11 Bluetooth® Communication and FLIR Tools™
- 12 Field Firmware Updates
- 13 Maintenance
- 14 Specifications
- 15 Appendices
- 16 Limited 10–Year Warranty
- 17 Customer Support
User Interface Menus
5
the material under test. See Section 15 Appendices for the Material Group
selection tables that help you select the correct group number.
Figure 5.17 Selecting a Material Group for pin-based moisture measurements
• Pin mode: Select this mode when using an external pin probe. See Sec-
tion 7.6 External Pin Probe Measurements for more information.
Figure 5.18 Selecting pin-based measurement mode
• Pinless mode: Select this mode when using the pinless sensor (rear of
MR277). See Section 7.5 Pinless Moisture Measurements for more
information.
Figure 5.19 Selecting the pinless measurement mode
#NAS100005; r. AG/62027/62027; en-US
15