Data Sheet
Table Of Contents
- 1 Advisories
- 2 Introduction
- 3 Safety
- 4 Descriptions
- 5 User Interface Menus
- 6 Powering the MR277
- 7 Moisture Measurement Operation
- 8 Thermal and Visible Camera Operation
- 9 Ambient Temperature and Humidity Measurements
- 10 Capturing and Working with Screen Captures
- 11 Bluetooth® Communication and FLIR Tools™
- 12 Field Firmware Updates
- 13 Maintenance
- 14 Specifications
- 15 Appendices
- 16 Limited 10–Year Warranty
- 17 Customer Support
User Interface Menus
5
Figure 5.14 Selecting the IGM™ Moisture mode from the main menu
• IGM™ Custom mode: Select this mode to view all of the measurement
types on the MR277 that you enable in the Settings menu (see Section
5.8).
Figure 5.15 Selecting the IGM™ Custom mode from the main menu
5.6 Moisture Modes Menu
The Moisture Mode Menu offers five sub-menus as described below.
Figure 5.16 Opening the Moisture Mode menu
• Material Group selection: This mode is only available when the pinless
mode is selected (below). Select Group 1 through Group 11 depending on
#NAS100005; r. AG/62027/62027; en-US
14