Data Sheet
Table Of Contents
- 1 Advisories
- 2 Introduction
- 3 Safety
- 4 Descriptions
- 5 User Interface Menus
- 6 Powering the MR277
- 7 Moisture Measurement Operation
- 8 Thermal and Visible Camera Operation
- 9 Ambient Temperature and Humidity Measurements
- 10 Capturing and Working with Screen Captures
- 11 Bluetooth® Communication and FLIR Tools™
- 12 Field Firmware Updates
- 13 Maintenance
- 14 Specifications
- 15 Appendices
- 16 Limited 10–Year Warranty
- 17 Customer Support
User Interface Menus
5
• No Measurements: Select this mode if you do not wish to see any meas-
urement values or icons on the display. Only the camera image will be seen
in this mode.
Figure 5.12 Selecting the ‘No Measurement’ mode from the main menu
• Center Spot (cross-hairs): Enable this mode to view the temperature
measurement of the targeted spot in the upper left hand corner of the dis-
play. Use the cross-hairs to target the measurement spot.
Figure 5.13 Selecting the ‘Center Spot’ mode from the main menu
• IGM™ Moisture mode: Select this mode to view the moisture measure-
ments on the upper left hand corner of the display. The IGM™ mode (Infra-
red Guided Measurement) is best suited for first scanning an area for
temperature measurements and then taking moisture measurements in the
strategic areas identified by the temperature measurements.
#NAS100005; r. AG/62027/62027; en-US
13