Datasheet

USER GUIDE 5
SPOT METERS AND REGIONS OF INTEREST (ROI)
When using spot meters and regions of interest, the FLIR ONE Pro will display
temperature estimates (in degrees C or F) on the image. The accuracy of
the Spot Meter(s) depends on many factors, including the distance from
the object, the ambient temperature, and the emissivity of the material
being observed. Users are encouraged to learn more about the science of
Thermography from www.infraredtraining.com. To switch between
Fahrenheit to Celsius, use the Settings option in the Control Panel.
Note: To add spot meters and/or RIOs, tap on the Spot Meter icon in the top left
corner to get a list of spot meters and RIOs. Add the number you want and click
the icon again. Up to three spot meters, three square ROIs, and three circular
ROIs can be displayed at one time. Tap and hold the Spot Meter to move it
around the screen. Pinch to adjust the size of the RIOIs, or tap and hold them to
move them around the screen.
TORCH
FLIR MSX
®
is a patented technology which makes use of the visible
camera in the FLIR ONE Pro to maximize detail and image sharpness. This
feature requires some amount of visible light, so in dark environments
turn on the smartphone’s ashlight to enhance the image detail. This
feature makes use of the light that is built into the phone.
TIMER
The Timer option allows the user to set a time delay before an image
is saved. When the Timer icon is selected, the Timer control panel is
displayed. The user can set the time delay to 3 or 10 seconds or turn o
the time delay option. When the Timer delay is enabled, the user saves an
image by tapping the round white button at the bottom of the screen, and
then a timer displays the countdown.
AUTOMATIC CALIBRATION
The camera has a mechanical shutter inside that periodically activates
and allows the thermal camera to do a calibration or image refresh.
When the shutter activates, the image will freeze for a brief period.
When the camera rst turns on, and periodically thereafter, the app
will perform an automatic calibration to provide an optimal image.
It is also possible to manually activate the shutter by tapping the
Calibration icon in the upper right on the main screen. Calibration
can be switched to manual by turning o Automatic Calibration in the
Settings Menu.
SPOT METERS AND ROIS