Installation Guide

CP-6408-21-I QIG Rev 130
May 2021
This document does not contain any export-controlled information.
To change the camera's video format to PAL using the DNA tool:
a. In the DNA Discover List, right-click
the camera and select Change Video
Format.
b. In the Change Video Format
window, select PAL.
c. Click Update, wait for Ok status to
appear, and then click Close.
For more information about using the DNA tool to configure one or more cameras,
see the DNA User Guide. While the software is open, click the Help icon .
4.3 Attach the Camera to a VMS
After you have mounted the camera and discovered or defined its IP address, you
can use VMS Discovery/Attach procedures to attach the camera to a VMS.
5 Camera Dimensions
Following are the Quasar CP-6408-21-I camera’s dimensions.
6 Register the Product
Register your Product with FLIR at https://customer.flir.com.
For warranty information, see https://www.flir.com/support-
center/warranty/security/flir-security-product-warranties/.
7 Contact Information
FLIR Systems, Inc.
6769 Hollister Avenue
Goleta, CA 93117
USA
Support: https://support.flir.com/
Corporate Headquarters
27700 SW Parkway Ave.
Wilsonville, OR 97070
USA