User Guide

Accessing the CB-3102 via a Web Browser

January 14, 2019

Ariel CB-3102 User and Installation Guide

In the Day/Night Switch Control section, configure the following settings:

 Mode – The Day/Night switch activates the IR Cut (IRC) filter for electronic day/night operation.

Three modes are available: Auto, Color, and B/W.

 Auto – Select Auto for automatic operation according to the ambient light level. The

camera converts from Day (color) mode to Night mode (monochrome/black and white)

automatically at nighttime or in low-light conditions. When there is sufficient light, the

camera converts automatically from Night mode to Day mode. This is the default setting.

 Color – Select Color for daylight operation. This deactivates IR mode by putting the

camera into Day mode.

 B/W – Select B/W (black and white) for nighttime operation. This activates IR mode by

putting the camera into Night mode.

 Time – Select Fast, Normal, or Slow to set the reaction time of the IRC filter. When set to Fast,

the filter switches faster between Day and Night modes. The default setting is Normal.

 Sensitivity – Use the slider to set the sensitivity between Low and High when switching from Day

to Night mode or Night to Day mode. When set to High, the camera automatically switches

between Day and Night modes upon minor changes in light intensity. When set to Low, the

camera automatically switches between Day and Night modes upon major changes in light

intensity.

In the IR Control section, configure the following settings:

 Mode – Select Auto, ON, or OFF. The default setting is Auto.

 LED Brightness– Select High, Medium, or Low. When set to High, the camera switches with

almost no delay between Color and B/W modes. The default setting is High.

Click Reset if you want to return to factory default settings.

6.3.3.2.2 Flickerless Mode

Flickerless mode eliminates flicker in indoor applications where fluorescent lighting is used. The darker

the ambient lighting, the slower the shutter speed should be.

Figure 96: Flickerless Exposure Mode Settings