User Guide

Accessing the CB-3102 via a Web Browser
January 14, 2019
Ariel CB-3102 User and Installation Guide
79
 Gain – Set the gain between 0-48 dB. Increasing the gain lightens dark pictures resulting from
low-level lighting. The default is 0.
 Digital WDR – See the explanation in the Auto Mode section above.
In the Day/Night Switch Control section, configure the following setting:
 Mode – See the explanation in the Auto Mode section above.
In the IR Control section, configure the following settings:
 Mode – See the explanation in the Auto Mode section above.
 LED Brightness – See the explanation in the Auto Mode section above.
Click Reset if you want to return to factory default settings.
CB-3102-11-I Exposure Screen
The Exposure screen is used for configuring basic exposure settings and day/night settings. The
configurable settings depend on the selected Exposure mode. In the Exposure section, select one of the
following Exposure modes: Auto Shutter, Flickerless, Auto Iris, or Manual. The choice of the Exposure
mode determines the configurable settings.
6.3.3.2.1 Auto Shutter Mode
Auto Shutter mode sets the camera’s shutter speed to automatically achieve a consistent video output
level. This mode is recommended for outdoor environments and indoor environments with fluorescent
lighting as the main light source. This is the default setting.
Figure 94: Auto Shutter Exposure Mode Settings