User Guide

Accessing the CB-3102 via a Web Browser
January 14, 2019
Ariel CB-3102 User and Installation Guide
63
Server Address – In the text box, enter the email server IP address.
Port – In the text box, enter the email server port number. The default port is 25.
User Name – In the text box, enter the email server user name.
Password – In the text box, enter the email server password.
3. In the Sender Settings area, configure the following settings:
Sender Email Address – In the text box, enter the sender’s email address.
Attach Image – From the drop-down list, select ON or OFF (default setting).
4. In the Email Address List section, do the following for each email address:
Select the checkbox in the Enable column. By default, Enable is not checked.
Enter the email address in the Email Address column.
Click Save.
6.3.1.6.2 FTP
The FTP screen is used for configuring the settings of an FTP server located remotely on the network.
The server is used for saving snapshots and recordings of events that are configured from the Events
Source section and transmitted from the camera via FTP to the remote FTP server.
Figure 77: Events Handler > FTP Screen
To configure FTP server settings
1. In the Server Address text box, enter the FTP server IP address.
2. In the Port text box, enter the email server port number.
3. In the User Name text box, enter the FTP server user name.
4. In the Password text box, enter the FTP server manager’s password.
5. From the Mode drop-down list, select Active or Passive (default setting).
In passive mode, FTP the client initiates both connections to the server, solving the problem of
firewalls filtering the incoming data port connection to the client from the server. In order to
support passive mode FTP on the server-side firewall, the following communication channels
must be opened:
FTP server's port 21 from anywhere (client initiates connection)
FTP server's port 21 to ports > 1023 (server responds to client's control port)
FTP server's ports > 1023 from anywhere (client initiates data connection to
random port specified by server)
FTP server's ports > 1023 to remote ports > 1023 (server sends ACKs and
data to client's data port)
6. Click Save.