User Guide

Accessing the CB-3102 via a Web Browser
January 14, 2019
Ariel CB-3102 User and Installation Guide
61
6.3.1.5.7 Tampering
The Events Source > Tampering screen is used for setting the sensitivity of the camera in case of
tampering.
Figure 75: Events Source > Tampering Screen
To enable tamper detection
1. Select Enable. By default, Enable is not checked.
2. From the Sensitivity drop-down list, select High, Medium, or Low.
To define the method to store a snapshot
1. See instructions in section 6.3.1.5.1.
To record the event on the camera
1. See instructions in section 6.3.1.5.1.
To enable sending an email notification
1. See instructions in section 6.3.1.5.1.
To define OSD text
1. See instructions in section 6.3.1.5.1.
To set the arming schedule
1. See instructions in section 6.3.1.5.1.