User Guide

Accessing the CB-3102 via a Web Browser
January 14, 2019
Ariel CB-3102 User and Installation Guide
53
Events Source
The Events Source tab is used for configuring general settings related to event notification. It includes
the following screens:
Defocus
Alarm
(CB-3102-11-I)
Audio
(CB-3102-11-I)
Motion
Network
Schedule
Tampering
6.3.1.5.1 Defocus
The Events Source > Defocus screen is used for defining the actions to be taken when triggered by a
defocus event: storing a snapshot; recording on the edge; defining email headers; defining text for the
OSD; and setting the arming schedule. To use these functions, select the Enable checkbox. By default,
Enable is not checked.
Figure 66: Events Source > Defocus Screen
To define the method to store a snapshot
1. In the Snapshot section, select the Store on Edge checkbox to store a snapshot on the camera’s
microSD card. By default, it is not checked.
2. In the Snapshot section, select the Store to FTP checkbox to store a snapshot on a remote FTP
site. By default, it is not checked.
To record an event on the camera
1. In the Recording section, select the Record on Edge checkbox to record a clip on the camera’s
microSD card. By default, it is not checked.
2. Click Save.
To enable sending an email notification
1. In the Email section, select the Enable checkbox. By default, Enable is not checked.
2. In the Subject text box, enter the email subject text.
3. In the Message text box, enter the email message text.
4. Click Save.
To define OSD text
1. In the OSD section, select the Enable checkbox. By default, Enable is not checked.
2. In the Text text box, enter the text to display in the on-screen display.
3. Click Save.