User Guide

Accessing the CB-3102 via a Web Browser
48
Ariel CB-3102 User and Installation Guide
January 14, 2019
Figure 57: EAP-TTLS Screen
2. From the Inner Authentication drop-down list, select one of the following protocols: CHAP,
EAP-MSCHAPV2, MD5, MSCHAP, MSCHAPV2, or PAP.
3. Enter the User Name and Password in the respective text box.
4. Enter the Anonymous ID in the Anonymous ID text box.
5. Click Browse to download the CA Certificate. The Status is displayed as “Not Installed” until the
CA certificate is downloaded.
6. Do one of the following:
Click Save. The status is displayed as “Not Installed” until the configuration is saved.
Click Test and Save to test and save the configuration.
To enable EAP-PEAP
1. Select EAP-PEAP. The Basic Settings screen opens. By default the Inner Authentication
protocol is MSCHAPV2.
Figure 58: EAP-PEAP Screen
2. Enter the User Name and Password in the respective text box.
3. Click Browse to download the CA Certificate.
4. Do one of the following:
Click Save. The status is displayed as “Not Installed” until the configuration is
saved.
Click Test and Save to test and save the configuration.