Spec Sheet

Security professionals around the world use FLIR

thermal imaging to secure perimeters and critical

assets, while facility operations personnel use the

same technology to gather non-contact temperature

measurements and condition monitoring data. The FLIR

Triton A310 PT Series combines thermal and visible

light imaging to oer both advanced perimeter security

and automated safety monitoring. Thermal imaging

reliably detects body heat and continuous temperature

measurements, while the visible camera oers added

visual veriﬁcation and long range viewing.

www.ﬂir.com/thermal-security

DUAL-SENSOR RADIOMETRIC

PAN/TILT

TRITON™ A310 PT

PERIMETER SECURITY EQUIPMENT MONITORING

Dual thermal and visible payloads with analytics

provide best-in-class intrusion detection

• 320 × 240 thermal resolution and multiple lens

options quickly detect objects of interest

• Visible light 36x continuous optical

zoom oers long-range imaging

• Pan/tilt capabilities allow tracking of moving targets

The A310 PT can detect hot spots and over heating

equipment by measuring slight changes in surface

temperature

• Built-in spot, area measurement, and temperature

measurement analysis

• Rugged IP66 environmental rating allows use in

harsh environments

• Monitors subtle temperature dierences in

substations, transformers, waste bunkers, and

coal piles

Temperatures exceeding pre-set

levels will trigger an alarm

• Set various alarms to dierent

temperature thresholds

• Quickly notify operators of any equipment

or area in need of immediate attention

• MPEG-4 video streaming allows live

imaging over Ethernet connections

WIDE-AREA SURVEILLANCE

FOR FIRE DETECTION

PAGE 1
D U A L- S E N S O R R A D I O M E T R I C P A N / T I LT TRITON™ A310 PT Security professionals around the world use FLIR thermal imaging to secure perimeters and critical assets, while facility operations personnel use the same technology to gather non-contact temperature measurements and condition monitoring data. The FLIR Triton A310 PT Series combines thermal and visible light imaging to offer both advanced perimeter security and automated safety monitoring.
PAGE 2
S P E C I F I C AT I O N S Imaging and optical data Ethernet IR resolution 320 × 240 pixels Thermal sensitivity/NETD < 0.05°C @ +30°C (+86°F) / 50 mK Lens identification Automatic F-number Ethernet Control, result and image Ethernet, type 100 Mbps Ethernet, standard IEEE 802.3 1.3 Ethernet, connector type 9 Hz / 30 Hz Ethernet, communication TBA Focus Automatic or manual (built in motor) Ethernet, video streaming Two independent channels for each camera - MPEG-4, H.