User's Guide
Table Of Contents
- Table of Contents
- Radar Overview
- Installation
- 2.1 Configuring the Radar for Networking
- 2.2 Radar Placement and Orientation
- 2.3 Site Preparation
- 2.4 Installing the Wall Mount Bracket
- 2.5 Connecting the Radar and Installing the Back Box
- 2.6 Installing the Radar Assembly
- 2.7 Uploading a Map Image and Configuring Georeference Settings
- 2.8 Aiming the Radar and Testing Target Detection
- 2.9 Defining Analytics Regions
- 2.10 Pairing a PTZ Camera with the Radar (Optional)
- Operation
- Configuration
- Maintenance and Troubleshooting Tips
427-0101-01-12 Revision 100 September 2020 35
This document does not contain any export-controlled information.
Configuration
Enable radar fusion, and then select this Elara Radar and one or more other Elara Radars to fuse
with this radar. You can also manually specify the IP address of another radar, add it, and select it to
be fused to be fused with this radar.
To save any changes, click Save.
4.7 Firmware & Info Page
On the Firmware & Info page, you can:
• Specify a unique name for the radar • Define a log level and download system information
• Upgrade the radar's firmware • Reboot the radar
• Reset the radar to its factory defaults