User's Guide
Table Of Contents
- Table of Contents
- Radar Overview
- Installation
- 2.1 Configuring the Radar for Networking
- 2.2 Radar Placement and Orientation
- 2.3 Site Preparation
- 2.4 Installing the Wall Mount Bracket
- 2.5 Connecting the Radar and Installing the Back Box
- 2.6 Installing the Radar Assembly
- 2.7 Uploading a Map Image and Configuring Georeference Settings
- 2.8 Aiming the Radar and Testing Target Detection
- 2.9 Defining Analytics Regions
- 2.10 Pairing a PTZ Camera with the Radar (Optional)
- Operation
- Configuration
- Maintenance and Troubleshooting Tips
427-0101-01-12 Revision 100 September 2020 31
This document does not contain any export-controlled information.
Configuration
Specify the Extensible Authentication Protocol (EAP) method:
• TLS: Provide an Identity and Private Key Password.
• Protected Extensible Authentication Protocol (PEAP): Provide an Identity or an Anonymous
Identity and a Password.
Changing these settings does not immediately take effect. To apply a change to these settings, click
Save and then reboot the radar.
4.4.3 Transport Layer Security (TLS) and Secure HTTP (HTTPS) Communication
Enable or disable radar control using Transport Layer Security (TLS)/secure HTTP (HTTPS).
Enable or disable HTTPS redirect.
Changes to these settings do not immediately take effect. To apply the changes, click Save and then
reboot the radar.
4.4.4 Other Cybersecurity Services