User's Guide
Table Of Contents
- Table of Contents
- Radar Overview
- Installation
- 2.1 Configuring the Radar for Networking
- 2.2 Radar Placement and Orientation
- 2.3 Site Preparation
- 2.4 Installing the Wall Mount Bracket
- 2.5 Connecting the Radar and Installing the Back Box
- 2.6 Installing the Radar Assembly
- 2.7 Uploading a Map Image and Configuring Georeference Settings
- 2.8 Aiming the Radar and Testing Target Detection
- 2.9 Defining Analytics Regions
- 2.10 Pairing a PTZ Camera with the Radar (Optional)
- Operation
- Configuration
- Maintenance and Troubleshooting Tips
427-0101-01-12 Revision 100 September 2020 18
This document does not contain any export-controlled information.
Installation
• Exit—The camera exits the automatic mode and performs the manual action.
• Exit and Come Back—The camera exits the automatic mode, performs the manual
action, and then returns to the automatic mode after the specified amount of time has
passed (Timeout Interval) following a manual command.
These settings take immediate effect and are saved. You do not have to click Save.