User Manual

ManualsBrandsFLIR Systems ManualsCamera & PhotoInfrared Camera

Table Of Contents

1 Disclaimers
- 1.1 Legal disclaimer
- 1.2 Usage statistics
- 1.3 Changes to registry
- 1.4 U.S. Government Regulations
- 1.5 Copyright
- 1.6 Quality assurance
- 1.7 Patents
- 1.8 Third-party licenses
2 Safety information
3 Notice to user
- 3.1 User-to-user forums
- 3.2 Calibration
- 3.3 Accuracy
- 3.4 Disposal of electronic waste
- 3.5 Training
- 3.6 Documentation updates
- 3.7 Important note about this manual
- 3.8 Note about authoritative versions
4 Customer help
- 4.1 General
- 4.2 Submitting a question
- 4.3 Downloads
5 Introduction
- 5.1 General description
- 5.2 Key benefits
6 Quick start guide
- 6.1 Procedure
7 A note about ergonomics
- 7.1 General
- 7.2 Figure
8 Camera parts
- 8.1 View from the right
  - 8.1.1 Figure
  - 8.1.2 Explanation
- 8.2 View from the left
  - 8.2.1 Figure
  - 8.2.2 Explanation
- 8.3 View from the bottom
  - 8.3.1 Figure
  - 8.3.2 Explanation
- 8.4 View from the rear
  - 8.4.1 Figure
  - 8.4.2 Explanation
- 8.5 Neck strap attachment points
  - 8.5.1 Figure
- 8.6 Battery condition LED indicator
  - 8.6.1 Figure
  - 8.6.2 Explanation
- 8.7 Power LED indicator
  - 8.7.1 Figure
  - 8.7.2 Explanation
- 8.8 Laser pointer
9 Screen elements
- 9.1 Figure
- 9.2 Explanation
- 9.3 Status icons and indicators
- 9.4 Image overlay information
10 Navigating the menu system
- 10.1 General
- 10.2 Navigating using the joystick
11 Handling the camera
- 11.1 Charging the battery
  - 11.1.1 Using the power supply to charge the battery
  - 11.1.2 Using the stand-alone battery charger to charge the battery
- 11.2 Turning on the camera
  - 11.2.1 Procedure
- 11.3 Turning off the camera
  - 11.3.1 Procedure
- 11.4 Adjusting the viewfinder’s dioptric correction
  - 11.4.1 Figure
  - 11.4.2 Procedure
- 11.5 Adjusting the angle of the lens
  - 11.5.1 Figure
- 11.6 Adjusting the infrared camera focus manually
  - 11.6.1 Figure
  - 11.6.2 Procedure
- 11.7 Autofocusing the infrared camera
- 11.8 Continuous autofocus
  - 11.8.1 General
  - 11.8.2 Procedure
- 11.9 Operating the laser pointer
  - 11.9.1 Figure
  - 11.9.2 Procedure
- 11.10 Using the digital zoom function
- 11.11 Assigning functions to the programmable buttons
  - 11.11.1 General
  - 11.11.2 Procedure
- 11.12 Using the camera lamp as a flash
  - 11.12.1 General
  - 11.12.2 Procedure
- 11.13 Changing lenses
- 11.14 Using the close-up lens
- 11.15 Changing the viewfinder eyecup
- 11.16 Calibrating the compass
  - 11.16.1 Procedure
12 Saving and working with images
- 12.1 About image files
- 12.2 Saving an image
  - 12.2.1 General
  - 12.2.2 Procedure
- 12.3 Previewing an image
  - 12.3.1 General
  - 12.3.2 Procedure
- 12.4 Opening a saved image
  - 12.4.1 General
  - 12.4.2 Procedure
- 12.5 Editing a saved image
- 12.6 Creating a PDF report in the camera
- 12.7 Deleting an image
  - 12.7.1 General
  - 12.7.2 Procedure
- 12.8 Deleting multiple images
  - 12.8.1 General
  - 12.8.2 Procedure
- 12.9 Deleting all images
  - 12.9.1 General
  - 12.9.2 Procedure
- 12.10 Resetting the image counter
  - 12.10.1 General
  - 12.10.2 Procedure
13 Achieving a good image
- 13.1 General
- 13.2 Adjusting the infrared camera focus
- 13.3 Adjusting the infrared image
- 13.4 Changing the temperature range
  - 13.4.1 General
  - 13.4.2 Procedure
- 13.5 Changing the color palette
  - 13.5.1 General
  - 13.5.2 Procedure
- 13.6 Changing the object parameters
- 13.7 Calibrating the camera
  - 13.7.1 General
  - 13.7.2 Manual calibration
- 13.8 Hiding all overlay
  - 13.8.1 General
  - 13.8.2 Procedure
14 Working with image modes
- 14.1 General
- 14.2 Image examples
- 14.3 Selecting the image mode
15 Working with measurement tools
- 15.1 General
- 15.2 Adding/removing measurement tools
- 15.3 Working with user presets
  - 15.3.1 General
  - 15.3.2 Procedure
- 15.4 Resizing or moving a measurement tool
  - 15.4.1 General
  - 15.4.2 Procedure
- 15.5 Changing object parameters
- 15.6 Displaying values in the result table and displaying a graph
  - 15.6.1 General
  - 15.6.2 Procedure
- 15.7 Creating and setting up a difference calculation
  - 15.7.1 General
  - 15.7.2 Procedure
- 15.8 Setting a measurement alarm
16 Working with color alarms and isotherms
- 16.1 Color alarms
  - 16.1.1 General
  - 16.1.2 Image examples
- 16.2 Setting up above, below, and interval alarms
- 16.3 Building isotherms
17 Annotating images
- 17.1 General
- 17.2 Adding a note
  - 17.2.1 General
  - 17.2.2 Procedure
- 17.3 Adding a table
  - 17.3.1 General
  - 17.3.2 Procedure
- 17.4 Adding a voice annotation
  - 17.4.1 General
  - 17.4.2 Procedure
- 17.5 Adding a sketch
  - 17.5.1 General
  - 17.5.2 Procedure
18 Programming the camera (time lapse)
- 18.1 General
- 18.2 Procedure
19 Recording video clips
- 19.1 General
- 19.2 Procedure
20 Screening alarm
- 20.1 General
- 20.2 Procedure
21 Pairing Bluetooth devices
- 21.1 General
- 21.2 Procedure
22 Configuring Wi-Fi
- 22.1 General
- 22.2 Setting up a wireless access point (most common use)
- 22.3 Connecting the camera to a wireless local area network (less common use)
23 Changing settings
- 23.1 General
- 23.2 Procedure
24 Technical data
- 24.1 Online field-of-view calculator
- 24.2 Note about technical data
- 24.3 Note about authoritative versions
- 24.4 FLIR T1020 12°
- 24.5 FLIR T1020 28°
- 24.6 FLIR T1020 45°
- 24.7 FLIR T1030sc 12°
- 24.8 FLIR T1030sc 28°
- 24.9 FLIR T1030sc 45°
- 24.10 FLIR T1040 12°
- 24.11 FLIR T1040 28°
- 24.12 FLIR T1040 45°
- 24.13 FLIR T1050sc 12°
- 24.14 FLIR T1050sc 28°
- 24.15 FLIR T1050sc 45°
25 Mechanical drawings
26 Cleaning the camera
- 26.1 Camera housing, cables, and other items
- 26.2 Infrared lens
- 26.3 Infrared detector
  - 26.3.1 General
  - 26.3.2 Procedure
27 Application examples
- 27.1 Moisture & water damage
  - 27.1.1 General
  - 27.1.2 Figure
- 27.2 Faulty contact in socket
  - 27.2.1 General
  - 27.2.2 Figure
- 27.3 Oxidized socket
  - 27.3.1 General
  - 27.3.2 Figure
- 27.4 Insulation deficiencies
  - 27.4.1 General
  - 27.4.2 Figure
- 27.5 Draft
  - 27.5.1 General
  - 27.5.2 Figure
28 About FLIR Systems
- 28.1 More than just an infrared camera
- 28.2 Sharing our knowledge
- 28.3 Supporting our customers
- 28.4 A few images from our facilities
29 Glossary
30 Thermographic measurement techniques
- 30.1 Introduction
- 30.2 Emissivity
  - 30.2.1 Finding the emissivity of a sample
- 30.3 Reflected apparent temperature
- 30.4 Distance
- 30.5 Relative humidity
- 30.6 Other parameters
31 History of infrared technology
32 Theory of thermography
- 32.1 Introduction
- 32.2 The electromagnetic spectrum
- 32.3 Blackbody radiation
- 32.4 Infrared semi-transparent materials
33 The measurement formula
34 Emissivity tables
- 34.1 References
- 34.2 Tables

Disclaimers1

1.4 U.S. Government Regulations

This product may be subject to U.S. Export Regulations. Please send any inquiries to ex-

portquestions@flir.com.

1.5 Copyright

cluding source code may be reproduced, transmitted, transcribed or translated into any

language or computer language in any form or by any means, electronic, magnetic, opti-

cal, manual or otherwise, without the prior written permission of FLIR Systems.

The documentation must not, in whole or part, be copied, photocopied, reproduced,

translated or transmitted to any electronic medium or machine readable form without pri-

or consent, in writing, from FLIR Systems.

Names and marks appearing on the products herein are either registered trademarks or

trademarks of FLIR Systems and/or its subsidiaries. All other trademarks, trade names

or company names referenced herein are used for identification only and are the prop-

erty of their respective owners.

1.6 Quality assurance

The Quality Management System under which these products are developed and manu-

factured has been certified in accordance with the ISO 9001 standard.

FLIR Systems is committed to a policy of continuous development; therefore we reserve

the right to make changes and improvements on any of the products without prior notice.

1.7 Patents

One or several of the following patents and/or design patents may apply to the products

and/or features. Additional pending patents and/or pending design patents may also

apply.

000279476-0001; 000439161; 000499579-0001; 000653423; 000726344; 000859020;

001106306-0001; 001707738; 001707746; 001707787; 001776519; 001954074;

002021543; 002058180; 002249953; 002531178; 0600574-8; 1144833; 1182246;

1182620; 1285345; 1299699; 1325808; 1336775; 1391114; 1402918; 1404291;

1411581; 1415075; 1421497; 1458284; 1678485; 1732314; 2106017; 2107799;

2381417; 3006596; 3006597; 466540; 483782; 484155; 4889913; 5177595;

60122153.2; 602004011681.5-08; 6707044; 68657; 7034300; 7110035; 7154093;

7157705; 7237946; 7312822; 7332716; 7336823; 7544944; 7667198; 7809258 B2;

7826736; 8,153,971; 8,823,803; 8,853,631; 8018649 B2; 8212210 B2; 8289372;

8354639 B2; 8384783; 8520970; 8565547; 8595689; 8599262; 8654239; 8680468;

8803093; D540838; D549758; D579475; D584755; D599,392; D615,113; D664,580;

D664,581; D665,004; D665,440; D677298; D710,424 S; D718801; DI6702302-9;

DI6903617-9; DI7002221-6; DI7002891-5; DI7002892-3; DI7005799-0; DM/057692;

DM/061609; EP 2115696 B1; EP2315433; SE 0700240-5; US 8340414 B2; ZL

201330267619.5; ZL01823221.3; ZL01823226.4; ZL02331553.9; ZL02331554.7;

ZL200480034894.0; ZL200530120994.2; ZL200610088759.5; ZL200630130114.4;

ZL200730151141.4; ZL200730339504.7; ZL200820105768.8; ZL200830128581.2;

ZL200880105236.4; ZL200880105769.2; ZL200930190061.9; ZL201030176127.1;

ZL201030176130.3; ZL201030176157.2; ZL201030595931.3; ZL201130442354.9;

ZL201230471744.3; ZL201230620731.8.

1.8 Third-party licenses

1.8.1 GNU Lesser General Public License (LGPL)

http://www.gnu.org/licenses/lgpl-2.1.en.html

(Retrieved May 27, 2015)

#T559954; r.28105/28105; en-US