User's Manual

Procedure to set
up thermal fusion
Follow this procedure:
1
Push
to display a toolbar.
On the toolbar, select Thermal fusion.2
Push
.
3
To change the portion of infrared in the image, do one of the following:
■
Push the joystick left/right to select
, then push the joystick up/down
to change the bottom temperature level.
■
Push the joystick left/right to select
, then push the joystick up/down
to change the top temperature level.
■
Push the joystick left/right to select
, then push the joystick up/down
to change the top and bottom temperature level at the same time, and
left/right to change the temperature span.
4
Publ. No. T559598 Rev. a554 – ENGLISH (EN) – September 27, 2011 47
17 – Working with thermal fusion and picture-in-picture image modes