User's Manual Part 1
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Notice to user
- 4 Customer help
- 5 Quick start guide
- 6 List of accessories and services
- 7 A note about ergonomics
- 8 Camera parts
- 9 Screen elements
- 10 Navigating the menu system
- 11 Pairing Bluetooth devices
- 12 Configuring Wi-Fi
- 13 Handling the camera
- 13.1 Charging the battery
- 13.2 Turning on the camera
- 13.3 Turning off the camera
- 13.4 Adjusting the viewfinder’s dioptric correction
- 13.5 Adjusting the angle of the lens
- 13.6 Adjusting the infrared camera focus manually
- 13.7 Autofocusing the infrared camera
- 13.8 Continuous autofocus
- 13.9 Operating the laser pointer
- 13.10 Using the digital zoom function
- 13.11 Changing lenses
- 13.12 Calibrating the compass
- 13.13 Changing the viewfinder eyecup
- 13.14 Using the camera lamp as a flash
- 14 Working with images
Handling the camera13
4. Select Device settings and push the joystick.
5. Select Set up camera and push the joystick.
6. Select Continuous autofocus. If the check box is unchecked, push the joystick to ena-
ble continuous autofocus.
7. Aim the camera toward the object of interest. The camera will now continuously
autofocus.
Note To pause continuous autofocusing, push the Autofocus/Save button half-way
down.
13.9 Operating the laser pointer
Note The laser pointer is enabled by a setting. Select (Settings) > Device settings
> Set up camera > Lamp & laser > Enable lamp & laser.
13.9.1 Figure
13.9.2 Procedure
Follow this procedure:
1. To turn on the laser pointer, push and hold the laser button.
2. To turn off the laser pointer, release the laser button.
Note
• A warning indicator is displayed on the screen when the laser pointer is turned on.
• The position of the laser dot is indicated on the infrared image (depending on the
camera model).
#T559880; r. AL/45866/46124; en-US
28