User Manual
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Introduction
- 4 Description
- 5 Operation
- 5.1 Powering the meter
- 5.2 Auto/Manual select mode
- 5.3 Auto/Manual range mode
- 5.4 Voltage measurements
- 5.5 Resistance measurements
- 5.6 Continuity test
- 5.7 Diode test
- 5.8 Capacitance measurements
- 5.9 Type K temperature measurements
- 5.10 Current measurements
- 5.11 Extended functionality
- 5.12 Hold mode
- 5.13 Locked mode
- 5.14 Streaming measurement data using Bluetooth
- 6 Maintenance
- 7 Technical specifications
- 8 Flir Global Limited Lifetime Warranty
7 Technical specifications
7.1 General specifications
Display 40 000-count with bar
Controls
• 6-position rotary function switch
• 4-way selector pad with center
OK button
• (6) dedicated function buttons:
mode, range, cancel, hold, Blue-
tooth, backlight
Backlight White LED
Work light White LED array
Measurement ranges
See section 7.2 Electrical range
specifications, page 26
Basic accuracy 0.06%
Measurement rate 20 per second, nominal
Display rate 2 times per second
Input impedance
>10 MΩ V DC, > 3 MΩ V AC in Nor-
mal mode
< 10 kΩ in Low Impedance mode
AC voltage bandwidth
45 Hz to 1 kHz
Power supply 6 × AAA batteries (LR03)
Battery life 100 hours, using alkaline batteries,
with no backlight, Bluetooth, or work
light use
Auto power off (APO) After a programmable number of mi-
nutes of inactivity, with audible pre-
alert; reset when the function switch
or buttons are pressed. Disable func-
tion supported.
#T559824; r.8007/8011; en-US 25
Final before translation