User Manual
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Introduction
- 4 Description
- 5 Operation
- 5.1 Powering the meter
- 5.2 Auto/Manual select mode
- 5.3 Auto/Manual range mode
- 5.4 Voltage measurements
- 5.5 Resistance measurements
- 5.6 Continuity test
- 5.7 Diode test
- 5.8 Capacitance measurements
- 5.9 Type K temperature measurements
- 5.10 Current measurements
- 5.11 Extended functionality
- 5.12 Hold mode
- 5.13 Locked mode
- 5.14 Streaming measurement data using Bluetooth
- 6 Maintenance
- 7 Technical specifications
- 8 Flir Global Limited Lifetime Warranty
4 Description
Data logging mode icon.
Sampling mode icon.
Setup mode icon.
Silent mode icon.
4.5.1 Out-of-range warning
If the input is over/under the full-scale range in Manual range mode, or if the sig-
nal has exceeded the maximum/minimum input in Auto range mode, OL is
displayed.
#T559824; r.8007/8011; en-US 12
Final before translation