User Manual
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Introduction
- 4 Description
- 5 Operation
- 5.1 Powering the meter
- 5.2 Auto/Manual select mode
- 5.3 Auto/Manual range mode
- 5.4 Voltage measurements
- 5.5 Resistance measurements
- 5.6 Continuity test
- 5.7 Diode test
- 5.8 Capacitance measurements
- 5.9 Type K temperature measurements
- 5.10 Current measurements
- 5.11 Extended functionality
- 5.12 Hold mode
- 5.13 Locked mode
- 5.14 Streaming measurement data using Bluetooth
- 6 Maintenance
- 7 Technical specifications
- 8 Flir Global Limited Lifetime Warranty
4 Description
Figure 4.2 Rear view
1. Probe clips.
2. Tilt stand.
3. Work light.
4. Battery compartment cover.
4.2 Function switch
The meter can measure voltage through the probe inputs. A low-
impedance load is placed across the inputs to stabilize the
measurement.
The meter is in full power-saving mode.
The meter can measure high voltage (V) through the probe inputs.
The meter can measure low voltage (mV) through the probe
inputs.
#T559824; r.8007/8011; en-US 8
Final before translation