User Manual
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Introduction
- 4 Description
- 5 Operation
- 5.1 Powering the meter
- 5.2 Auto/Manual select mode
- 5.3 Auto/Manual range mode
- 5.4 Voltage measurements
- 5.5 Resistance measurements
- 5.6 Continuity test
- 5.7 Diode test
- 5.8 Capacitance measurements
- 5.9 Type K temperature measurements
- 5.10 Current measurements
- 5.11 Extended functionality
- 5.12 Hold mode
- 5.13 Locked mode
- 5.14 Streaming measurement data using Bluetooth
- 6 Maintenance
- 7 Technical specifications
- 8 Flir Global Limited Lifetime Warranty
3 Introduction
Thank you for choosing a Flir DM93 digital multimeter.
This device is shipped fully tested and calibrated and, with proper use, will pro-
vide years of reliable service.
3.1 Key features
• 40 000/4000-count extra-large digital display.
• 43-segment bar graph.
• Auto backlit, dual display.
• Auto AC, DC, and AC+DC in voltage and current mode with frequency
indication.
• Auto selection for resistance, diode polarity, or continuity.
• On-screen menu selection.
• Navigator key drive.
• High-frequency rejection (HFR).
• 0.03% DCV accuracy.
• AC+DC true RMS indication.
• 0.5 ms peak hold.
• Auto hold.
• Store/recall memories.
• dBm/dB measurement.
• 20 000-record data logging capacity.
• All-weather housing.
• Optical USB interface with software included.
• Magnetic hanging kit.
• CAT. IV 600 V/CAT. III 1000 V standard.
#T559824; r.8007/8011; en-US 6
Final before translation