User's Guide

427-0100-00-12 Version 110 April 2019 7
WARNING - EAR Controlled Technical Data
Installation
1.2.2 Supplied Components
The Saros Dome camera kit include
s these standard components:
Items Included in Kit
Back box cover
10-pin connector
Ethernet port
Sunshield
Tor x
wrench
Camera ball
Back box
Screwdriver
RJ45 cover
1.2.3 Additional Supplies
The installer might need to supply the following it
ems as required (specific to the installation).
• PoE power supply or PoE switch for
camera power.
• Cat5e or Cat6 Ethernet cable for digital video and PoE for system power
.
• Ten-conductor accessory cable for auxiliary power and alarm in/out.
•
Camera grounding strap, camera mount, electrical hardware, connector
s, and tools.
1.2.4 Site Preparation
The following recommendations provide for proper installation and op
eration of the unit. Adhere to all
local and industry standards, codes, and best practices.
• Ambient Environment Conditions:
Avoid positioning the unit near heaters or heating system
outputs. Avoid exposure to direct sunlight.
• Safety: Cables and
electrical cords should be routed in a manner that prevents safety hazards.
Ensure that nothing rests on the unit’s cables or power cords.
• Ample Air Circulation: L
eave enough space around the unit to allow free air circulation.
• Cabling Considerations:
Using a cable longer than the manufacturer’s specifications for
optimal video signal may result in degradation of color and video parameters.