User's Guide

427-0100-00-12 Version 110 April 2019 38
WARNING - EAR Controlled Technical Data
Configuration
Step 3 Verify that the camera certificate files are valid. Make sure Certificates are OK appears
under the certificate information. Certificate information appears at the bottom of the
Certificates section, under Download certificate.
TLS/HTTPS
Enable or disable camera control using Transport Layer Security
(
TLS)/secure HTTP (HTTPS).
Enable or disable HTTPS redirect.
Services
Enable or disable digest authentica
tion for the Nexus CGI control interface. The default setting is On.
Changing this setting does not immediately take effect. To apply a change to this setting, click Save
and then reboot the camera.
3.2 Maintenance and Troubleshooting Tips
If help is needed during the installation process, contact the local FLIR representative, or visit the
FLIR Support Center at: https://www.flir.com/support-center/support-hq/. FLIR Systems, Inc. offers a