User's Guide

427-0100-00-12 Version 110 April 2019 34
WARNING - EAR Controlled Technical Data
Configuration
Click Reboot to cause the camera to power cycle and reinstall configuration files.
Support System Info
Set the logging details up to four log levels. Including more levels will
increase the size of
the log file.
Set the compatibility mode for legacy VM
S versions.
Name
Enter a unique, friendly name for the camera, using only
alphan
umeric characters. The default name for the camera is the camera model followed by the
camera’s serial number.
Enter camera name
Camera name
3.1.6 Alarm Page
Two default alarms have been provided to react to motion detected in
a video analytics region.
• Visible LED on Motion—Wh
en a alarm is triggered by the video analytics, the visible LEDs are
turned on. Enabled by default.
• Output on Motion—When a alarm is triggered by the
video analytics, the system generates an
output signal at the I/O connector as well as a virtual output for connected VMS systems.
Enabled by default.
By default, the Alarm logic can also pro
cess an input signal to Arm/Disarm the video analytics
detection.
• Arm/Disarm Analytics with Input—
An input signal on the I/O connector as well as a virtual
input from a connected VMS systems can arm or disarm the video analytics. Disabled by default.
Click to toggle