User's Guide

427-0100-00-12 Version 110 April 2019 31
WARNING - EAR Controlled Technical Data
Configuration
3.1.2 Date & Time Page
The Date & Time page is used to configure the date and time settings. Th
e date, time, and time zone
can be obtained from an NTP server, or can be entered manually. If NTP mode is selected, the NTP
server information can be entered.
Set the date and time parameters, then click Save at the bottom of the page.
When Manual mode is selected, you can s
elect to use the PC time, select and type hour, minute,
second, or date values, or select a pop-up window to select a calender date.
After setting the date and time, the camera will require a reboot. A
confirmation prompt will appear.
Copy PC time
Select date pop-up