User's Guide

427-0100-00-12 Version 110 April 2019 25
WARNING - EAR Controlled Technical Data
Operation
Calibrate Analytics
After setting up masking regions, calibrate the scene.
Step 1 Have people walking through the detection region at
various distances when you start Auto scene
analysis.
1
Step 2 Click Reset. The camera automatically analyzes the
depth of the FoV based on the people walking in the
scene. Be sure to have target people walking along
the entire vertical axis of the FoV and along diagonals
until scene analysis is completed.
2
Step 3 After calibration is complete, set up detection areas
and check calibration. Refer to Global Settings, Creating Analytics Regions, and Check
Calibration.
Manual Calibration
Step 1 On the camera’s Vi
deo Analytics web page, click Manual.
1
Step 2 Click Edit Calibration Areas for the Calibration mode.
2