User's Guide

427-0100-00-12 Version 110 April 2019 10
WARNING - EAR Controlled Technical Data
Installation
Step 5 Click System Settings.
Step 6 On the Network tab, set network
parameters such as static IP or DHCP addressing, and
then click Save.
1.2.6 Onboard the Camera to FLIR Cloud
The camera can be onboarded to FLIR
Cloud while still in its shipping box or after installation using
the camera’s web page.
To onboard a camera:
Step 1 On the camera’s System Sett
ings page, click Cloud.
Enter FLIR Cloud
Enter password
Enter device name
Click to onboard
user name
Step 2 Enter the user name and password for the FLIR Cloud account to which the camera will be
onboarded.
Step 3 For the device name, enter a nam
e using alphanumeric characters, blank spaces, and
hyphens. Do not use any other special characters such as @, &, or *. This name identifies
the camera in FLIR Cloud.