User Manual

4 Description
The meter can measure voltage through the probe inputs.
The meter is in full power-saving mode.
4.3 Function buttons
• Use the button to select Auto select or Manual select mode,
see section 5.2 Auto/Manual select mode, page 12.
• In Manual select mode, press the button to select the operat-
ing mode.
• Use the button to select Auto range or Manual range mode,
see section 5.3 Auto/Manual range mode, page 13.
• In Manual range mode, press the button to change the range
(scale).
Press the button to toggle between Normal and Hold mode. In
Hold mode, the display freezes the last reading and continues to
display this value.
• Press the button to enable/disable the display backlight.
• Press and hold the button for 2 seconds to enable/disable the
work light.
Press the button to enable/disable MeterLink (Bluetooth) commu-
nication, see section 5.11 Streaming measurement data using
Bluetooth, page 24.
#T559825; r.8008/8011; en-US 9