User Manual

3 Introduction
Thank you for choosing a Flir CM83 clamp meter.
This device is shipped fully tested and calibrated and, with proper use, will pro-
vide years of reliable service.
3.1 Key features
• 10 000-count digital display.
• Active backlit, large-scale display.
• Analog bar graph.
• True RMS reading in AC and AC+DC mode.
• Torch lightening when clamping.
• Auto AC/DC 1000 A capability and selection.
• Auto AC/DC 1000 V capability and selection.
• Auto resistance/continuity/diode selection.
• Power and power factor measurement.
• Total harmonic distortion and 1 to 25 harmonics.
• Phase rotation Indication.
• 100 kΩ resistance capability.
• VoltSense (none-contact voltage).
• Frequency counter.
• Capacitance capability.
• Temperature function.
• Smart data hold.
• Peak hold.
• In-rush current.
• DCA auto-zeroing key.
• Minimum/maximum hold.
• Low-pass filter.
• Auto power off.
• Up to 42 mm diameter (1000 MCM) conductor.
• Bus bar size 62 mm × 12 mm (2.4″ × 0.5″).
• 1.2 m (4′) drop-proof.
• Convenient battery cover.
• CAT. IV 600 V /CAT. III 1000 V standard.
#T559825; r.8008/8011; en-US 6