User's Manual
Table Of Contents
- 1 Disclaimers
- 2 Safety information
- 3 Introduction
- 4 Description
- 5 Operation
- 5.1 Powering the meter
- 5.2 Auto/Manual range
- 5.3 Current measurements
- 5.4 Voltage measurements
- 5.5 Resistance measurements
- 5.6 Capacitance measurements
- 5.7 Frequency measurements
- 5.8 Type K temperature measurements
- 5.9 Continuity
- 5.10 Diode test
- 5.11 IR temperature measurements
- 5.12 MAX/MIN mode
- 5.13 Peak hold
- 5.14 Temperature units
- 5.15 Streaming measurement data using Bluetooth
- 6 Maintenance
- 7 Technical specifications
- 8 Technical support
- 9 Warranties
4 Description
Figure 4.2 Rear view
1. IR sensor.
2. Laser pointer diode.
3. Battery compartment.
4.2 Function switch
The meter can measure voltage or frequency through the probe
inputs. The type of measurement is selected by the
button.
The meter can measure resistance, continuity, or diode polarity
through the probe inputs. The type of measurement is selected by
the
button.
The meter can measure capacitance through the probe inputs.
#T559826; r.9072/9080; en-US 9