Operations Manual

Table Of Contents

Getting Started

4.2.5 Device Status menu

Select the Device Status menu item from the main menu to access the following inform-

ation about the Fido X4. The information on the Device Status menu is display only; you can-

not modify it.

Serial Number: Each Fido X4 ETD can be identified using its unique serial number. All data

stored on the device will include this serial number.

Firmware Version: The firmware version indicates the version of the software that is cur-

rently running on the system.



Note: The version of the detection algorithm installed on the device is independent from

the firmware version.

SE Type: Indicated the type of sensing element installed in the system.

SE Runtime: The amount of time the current sensing element has been in the system with

the system powered ON.

System Runtime: Total runtime for the system hardware.

Detector Component Temperatures: Current temperature for each detector hardware

component. These values will flash red if they are out of range.

Flow Rate: The volumetric flowrate into the detector inlet and across the sensor array.

Swipe Count: Total number of samples swipes that have been processed.

Disk Free: The amount of free storage space remaining on the device.

Figure 4-9: Device Status menu