Operations Manual
Table Of Contents
- 1 Introduction
- 2 Safety
- 3 System Overview
- 4 Getting Started
- 5 Operating the Fido X4
- 6 Reviewing Data
- 7 Connecting to a Computer
- 8 System Maintenance
- 9 Understanding Alerts
- 10 Specifications
- Table of Figures
- Index
Getting Started
4 Getting Started
This chapter describes some basic features of the keypad and display of the Fido X4.
4.1 The Keypad
4.1.1 Overview
The Fido X4 has rubberized tactile input keys (Figure 4-1) located below the display.
Figure 4-1: Keypad
In this manual, the following graphics will be used to indicate the input keys:
Power
Menu
Back
Enter
Directional Pad. Press the outer edges of the Enter key to input the following commands:
Press top edge of Directional Pad Up
Press bottom edge of Directional Pad Down
Press left edge of Directional Pad Left
Press right edge of Directional Pad Right
4.1.2 Using the Input Keys
4.1.2.1 Enter key
Press to select the highlighted or underlined menu, control, or command. In the example
shown in Figure 4-2, Info is underlined, meaning you would press to display an inform-
ation screen..
22 4226044 (Rev. C) © 2020 FLIR Systems, Inc.