Specifications

Disable Equipment disabled
Unable Ch
Unable to use proposed channel
Unable mode Unable to use proposed mode
Making an Individual call
From the Individual Call menu: Menu > DSC Calls >
Individual Call.
1. Select
Phonebook to make a routine call to a contact
saved in your Phonebook, or
2. Select
Recent Calls to make a routine call to a
contact that you have called recently, or
3. Select
Enter MMSI to manually enter the MMSI
number of the station you want to contact.
4. Select a contact or enter an MMSI manually and
press the
OK button.
5. Select the Channel you want to transmit the call on.
If the MMSI is a CSR then the radio will automatically
tune to the correct Channel. The radio will wait for
an acknowledgement to be received.
6. If an acknowledgement is received, press the OK
button.
7. Press and hold the
PTT button and speak your
message.
8. Release the
PTT button when you have completed
your message.
Receiving an Individual call
With an incoming individual call displayed:
1. Select
Show info from the options to review relevant
call details.
2. Select
Reply on Ch ## at any time to accept the call.
If auto channel change is turned on then the channel
will automatically change after 10 seconds.
The radio is re-tuned to the specified channel.
3. To reject the call, select
R
eject.
4. If you rejected the call, select a reason for the
rejection from the list.
Confirmation of the acceptance or rejection of the call is
displayed. If you have accepted the call then the radio
will re-tune to the requested channel.
7.6 Group calls
Group calls can be made to groups of vessels sharing
the same Group MMSI numbers.
Group calls are made by selecting a saved group contact
from the
Phonebook or by entering the Group MMSI
number for the group you want to call.
Making a group call
From the
Group Call menu: Menu > DSC Calls > Group
Call.
1. Select
Phonebook to make a call to a group saved in
your Phonebook, or
2. Select
Recent Calls to make a call to a group that
you have called recently, or
3. Select
Enter MMSI to manually enter the MMSI
number of the group you want to contact.
4. Select a group or enter an MMSI manually and press
the
OK button.
5. Select the Channel you want to transmit the call on.
The radio will wait for an acknowledgement to be
received.
6. If an acknowledgement is received, press the OK
button.
7. Press and hold the
PTT button and speak your
message.
8. Release the
PTT button when you have completed
your message.
Receiving a group call
Note:
To receive a call made to a Group, the Group’s MMSI
number must be saved in your Ponebook.
With an incoming group call displayed:
1. Select
Show info from the options to review relevant
call details.
2. Select
Reply on Ch ## at any time to accept the call.
If auto channel change is turned on then the channel
will automatically change after 10 seconds.
The radio is re-tuned to the specified channel.
3. To reject the call, select
Reject.
4. If you rejected the call, select a reason for the
rejection from the list.
Confirmation of the acceptance or rejection of the call is
displayed. If you have accepted the call then the radio
will re-tune to the requested channel.
7.7 Position requests
The radio can request position information from any
station capable of responding to the request.
Position requests can be sent to any contact stored in
the
Phonebook or by manually inputting the station’s
MMSI number.
When connected to a Raymarine® multifunction display
(MFD) the position data from the request can also be
display in the Chart app.
Making a position request
You can request the position of another station.
From the
Position Request menu: Menu > DSC Calls
> Position Request.
68
81381-3-en-US_A5_PRINT.pdf 68 5/4/2020 3:26:33 PM