Specifications

Enabling and disabling A
TIS mode
ATIS is a European system used on some inland
waterways. A unique ATIS ID must be entered before
ATIS mode can be enabled.
With ATIS mode enabled the radio’s region will be
fixed to the INT (international) frequency band and the
following functions are disabled:
• DSC functions
• Watch Mode
• Scan Mode
• High/low power is restricted on certain channels
From the Main menu.
1. Select
Set-up.
2. Select
A
TIS set-up.
3. Select
ATIS.
If no ATIS ID has been set then you will be requested
to enter one before ATIS mode is enabled.
4. If an ATIS ID has already been set then select
On to
enable ATIS mode or
Off to disable ATIS mode.
5.15 Changing the radio region
Prior to using the radio you must set the Frequency band
to the region your radio will be used in.
From the Main menu:
1. Select Set-up.
2. Select
Channel set-up.
3. Select
Frequency band.
4. Select the relevant region from the list.
The available options are:
• International
• USA
• Canada
An icon is displayed on the Homescreen that identifies
which region has been set.
5.16 Switching between high
and low transmit power
You can switch transmit power using the HI/LO button
on the Handset / Fistmic.
The transmit power can also be changed from the
Set-up menu: Menu > Set-up
1. Select
Power output.
Selecting the Power output option will switch
between High (25 watt) and Low (1 watt) power
output.
5.17 GNSS (GPS) set up
If your radio has a GNSS (GPS) position fix then the
following information can be displayed:
• latitude
• longitude
• UTC time
• COG and SOG
When position data is available the satellite icon is
displayed onscreen.
If no position data is available then the latitude, longitude
and time can be entered manually so that it can be
included in DSC distress transmissions.
Position data received from other vessels can be
displayed on a connected Raymarine® multifunction
display.
Enabling and disabling the internal
GNSS (GPS)
From the GPS set-up menu: Menu > Set-up > GPS
set-up
1. Select
Integrated GPS.
Selecting
Integrated GPS will switch the radio’s
internal GNSS receiver On and Off.
Switching between internal and
external antenna
Your radio’s built-in GNSS (GPS) receiver includes and
internal antenna, to improve performance you can
connect an external antenna. You must select which
antenna you are using.
From the
GPS set-up menu: Menu > Set-up > GPS
set-up
1. Select
GPS antenna.
Selecting
GPS antenna will switch between the
internal antenna and external antenna.
No position data
If no position data is available or position data becomes
unavailable; after 10 minutes an audible warning is
sounded, the GNSS (GPS) icon flashes and the No
position data message is displayed.
Getting started
55
81381-3-en-US_A5_PRINT.pdf 55 5/4/2020 3:26:32 PM