Specifications

3. Select Yes.
4. Use the
Rotary knob or the Channel Up and
Channel Down buttons on a Raymic handset to
cycle through the available numbers and press
OK
to confirm each number and move to the next digit.
You should only enter the unique 9 digit MMSI
number provided by your licensing authority.
MMSInumbersstartingwitha‘0’areonlyusedfor
groupsandcoaststations.Ifyouentera‘0’asthe
firstdigittheradiowillassumeyouareenteringa ship
station MSIandautomaticallyassigna‘0’as
theseconddigit;thisistoensureagroupMMSIis
notenteredastheradio’suniqueMMSI.
5. Press the Back button at any time to edit digits you
have already entered.
6. Press and hold the
OK button to display options to
Move cursor back and forward through the digits.
7. When the final digit is confirmed select
DONE.
Example
8. The MMSI is displayed onscreen, check that it is
correct, then:
i. Select
Yes – Save,or
ii. if the number entered is not correct select
No –
Retry.
Caution: MMSI and ATIS ID
entry
You can only enter the MMSI number and
ATIS ID once!
If you store an incorrect MMSI number or
ATIS ID in your product, it will have to be
reset by an authorized Raymarine
®
dealer.
5.14 Entering your ATIS ID
A unique ATIS ID must be entered before ATIS mode
can be enabled.
From the Main menu.
1. Select
Set-up.
2. Select
ATIS set-up.
3. Select
ATIS ID.
Not set will be displayed if no ATIS ID has been set.
The first digit is set to a ‘9’ and cannot be changed,
this is because all ATIS IDs start with a ‘9’.
As most ATIS IDs consist of a ‘9’ followed by your 9
digit MMSI number; if your radio already has an MMSI
number the ATIS ID will be pre-filled in this format.
4. If the ATIS ID has been pre-filled, check it carefully
against your issued ATIS ID.
5. To enter your ATIS ID manually, use the
Rotary knob
or the
Channel Up and Channel Down buttons on
a Raymic handset to cycle through the available
numbers and press
OK to confirm each number and
move to the next digit.
You should only enter the unique 10 digit ATIS ID
provided by your licensing authority.
6. Press the Back button at any time to edit digits you
have already entered.
7. Press and hold the
OK button to display options to
Move cursor back and forward through the digits.
8. When the final digit is confirmed select
DONE.
Example
9. The ATIS ID is displayed onscreen, check that it is
correct, then:
i. Select
Yes – Save,or
ii. if the number entered is not correct select
No –
Retry.
Caution: MMSI and ATIS ID
entry
You can only enter the MMSI number and
ATIS ID once!
If you store an incorrect MMSI number or
ATIS ID in your product, it will have to be
reset by an authorized Raymarine
®
dealer.
54
81381-3-en-US_A5_PRINT.pdf 54 5/4/2020 3:26:32 PM