Specifications

only applicable if the radio has been pre-programed
in MARCOM-C mode. See 5.14 Entering an ATIS ID
for more information.
6. Frequency band selection — Sets the relevant
channels for your region. This step is not applicable
if the radio has been pre-programed in MARCOM-C
mode. See 5.15 Changing the radio region for more
information.
5.9 Accessing the menu
The radio’s various options and settings are contained
within the menu.
From the Homescreen.
1. Press the
Rotary knob’s OK push button.
5.10 Selecting a language
The language the radio uses can be changed.
From the Main menu:
1. Select
Set-up.
2. Select
Language.
The languages available are:
• English (default) — English
• Español — Spanish
• Français — French
• Deutsch — German
• Italiano — Italian
3. Select the language that you want the radio to be
set to.
The User interface language is changed to the selected
language.
5.11 Switching on the AIS
receiver
If your radio includes a built-in AIS receiver then it can
be enabled and disabled as follows:
From the Main menu:
1. Select
Set-up.
2. Select
AIS.
3. Select
On to switch the receiver on, or select Off to
switch the receiver off.
5.12 Selecting a network type
When connecting your radio to other devices it is
important to ensure you select the network connection
and type that you want data to be transmitted over.
From the Main menu:
1. Select
Set-up.
2. Select
Network output.
The following network types are available:
• NMEA 2000 (default)
• 0183 High speed
• 0183 Std speed
3. Select the network type relevant to the devices
connected to your radio. If your radio is not
connected to any other devices any option can be
selected.
Selecting 0183 Std speed will disable the built-in AIS
receiver, where applicable.
The Network output setting determines the baud rate
of the NMEA 0183 input:
Network output setting
NMEA 0183 input baud
rate
NMEA 2000
Standard speed (4,800)
NMEA 0183 High Speed
High speed (38,400)
NMEA 0183 Standard
Speed
Standard speed (4,800)
5.13 Entering your MMSI
number
To program your radio with your MMSI number follow
the steps below.
From the Set-up menu: (Menu > Set-up)
1. Select
DSC set-up.
2. Select
MMSI.
The MMSI required message will be displayed if no
MMSI number has been set.
Getting started
53
81381-3-en-US_A5_PRINT.pdf 53 5/4/2020 3:26:32 PM