Instructions / Assembly

ASSEMBLY INSTRUCTIONS
4
F
A
F
A
6
B
C
C
3. Insert screws (D) through the predrilled holes inside
the French cleat (F) and into the anchors (E) and tighten
securely.
3
D
D
F
4. Hang the cabinet (A) onto the French cleat (F).
6. Insert shelf brackets into corresponding holes at
the desired level. Place shelves(B) over shelves brackets
4
D
5
5. Mark the wall through the predrilled hole in cabinet (A)
with a pencil. With the help of another person, remove
the cabinet (A) from the wall. Use the marked point as
the insertion point for an anchor (E). Using a 3/16 in. drill
bit, drill a hole on the mark you have made on the wall.
Place Phillips screwdriver in the recesses of anchor (E).
Slowly turn anchor (E) clockwise while applying pressure
until flanges just touch the wall. Again, align the slot on
the back of cabinet (A) slightly above French cleat (F)
and slide cabinet (A) down until the slot rests on French
cleat (F). Insert screw (D) through predrilled hole inside
cabinet (A). Tighten screw (D) against the wall.