Instructions / Assembly

PREPARATION
ASSEMBLY INSTRUCTIONS
3
Please make sure all parts are available before beginning to install the product. Compare parts with
package content list and hardware content list. If any part is missing or damaged, do not attempt
to assemble, install or operate the product. Contact customer service for replacement parts.
Estimated assembly time: 20 minutes
Tools required for assembly (not included):
Phillips screwdriver, electric drill, hammer, carpenter’s level.
2
1
1. Place French cleat (F) on the wall and use it as a guide to determine
the points to locate the anchors (E) .Use a pencil (not included)
to mark the position of the anchors (E) on the wall. Use a level (not
included) to ensure cabinet (A) will be level and plumb against the wall
2. Use a 3/16 in. drill bit (not included) to drill 1/4 in. guide holes at
t marked locations. Insert anchors(E) into the holes
until the flanges on the anchors(E) are flush against the wall.
he previously
F
E
E