Instruction Manual

FlintWeigh II IPC Technical Manual, Rev. 1.06 November 2011
Page 7 of 36
Fig. 3.2: Connection of standard load cells via junction box with an int
egrated LDU
Fig. 3.3: Connection of type RC3D digital load cells
3.3. Scope of Delivery
In addition to the industrial PC the scope of delivery consists of:
► The weighing system controller (=WSC, already built into the industrial PC)
► The ordered weighing module (already plugged to the WSC)
► A suitable plug connector for the standard load cells
► An optional plug connector for the digital load cells and the digital I/O
► The preinstalled device driver for the weighing system controller
► The FlintWeigh II software
► This manual
► A medium (CD-ROM) with the FlintWeigh II software, the device driver for the weighing system
controller, the technical manual, the test certificates of the LDUs, the FlintWeigh II EC type approval,
some examples for using the OLE functions and a template for the scale’s descriptive plate in RTF
format
Hint: All data of the supplied medium are localized on the industrial PC’s hard disk in the directory
“C:\Install\WSC”.