Manual

FAD-30 Technical Manual, Rev. 1.06 December 2012 Page 9 of 48
3.3. Housing
FAD-30 instruments come within a polyamide housing sealed to IP20. They are prepared for mounting on NS
37/7 or NS 35/15 standard DIN rails (see drawings).
22,5 mm
45 mm
99 mm
114,5 mm
View A
View B
Side view
View A: FAD-30, FAD-30MB
View B: FAD-30PB, FAD-30PN, FAD-30EN, FAD-30CO
Figure 3.2 – Dimensions
3.4. Accessories
Accessories supplied with the instrument
The following accessories are supplied together with the instrument. If any part
is missing, please contact your supplier.
FAD-30
FAD-30MB
FAD-30EN
FAD-30PB
FAD-30PN
FAD-30CO
4-pin and 5 mm pitch plug, light gray
1
1
2
2
2
2
7-pin and 3.81 mm pitch plug for load cell cable, black
1
1
1
1
1
1
6-pin and 3.81 mm pitch plug for RS-232C and RS-485, black
1
1
Installation CD (xFace software, technical documentation)
1
1
1
1
1
1
Table 3.1 – Accessories supplied with instrument
Accessories sold separately
The following accessories are available from Flintec.
FAD-30
FAD-30MB
FAD-30EN
FAD-30PB
FAD-30PN
FAD-30CO
RS-232C cable (3 m long) for connection with PC
√
√
√
√
√
√
Junction box for load cell connection
Refer to Flintec catalog
Open end load cell cable, 6 wire ( 0.22 cm
2
each )
Max. 200 meter length
Table 3.2 – Accessories supplied separately