Manual

FAD-30 Technical Manual, Rev. 1.06 December 2012 Page 21 of 48
Commands and Responses
A
Read all weight data
Command: [ADR][A]
Response: [ADR][A][STATUS][SIGN][NET W][SIGN][TARE W][SIGN][GROSS W]
Example:
Command : 01A
Response : 01AS+000123.4+000111.1+000234.5
01AD+000123.4+000111.1+000234.5
01AO ( ADC out error )
Comments: The response is net, tare and gross weight values or error status. All weight data will be
transmitted immediately after receiving the command.
B
Read Gross weight
Command: [ADR][B]
Response: [ADR][B][STATUS][SIGN][WEIGHT VALUE]
Example:
Command: 01B
Response: 01BS+000123.4 (gross weight is stable and 123.4)
01BD+000123.4 (gross weight is unstable and 123.4)
01B− (under load)
Comments: The response is the gross weight value (stable or unstable) or error status. Gross weight data
will be transmitted immediately after receiving command.
C
Clear the tare memory
Command: [ADR][C]
Response: [ADR][C][A] (Cleared and the scale is in gross mode)
[ADR][C][X] (Clear command is unavailable in count mode)
Comments: The response status is always Ack in weighing or force mode and always X in count mode.
D
Read Count value immediately
Command: [ADR][D]
Response: [ADR][D][STATUS][SIGN][COUNT VALUE]
Example:
Command: 01D
Response: 01DD+00123400
01DO (ADC out error)
01DX (Not in count mode)
Comments: Count value will be sent immediately.
I
Read indicated weight
Command: [ADR][I]
Response: [ADR][I][STATUS][SIGN][WEIGHT VALUE]
Example:
Command: 01I
Response: 01IS+000123.4 ( weight is stable and 123.4 )
01ID+000123.4 ( weight is unstable and 123.4 )
01I+ ( overload )
Comments: The response is the indicated weight value (stable or unstable). It will be transmitted
immediately after receiving the command. The weight value may be in gross or net.
P
Print :Read the stable weight
Command: [ADR][P]
Response: [ADR][P][STATUS][SIGN][WEIGHT VALUE]
Example:
Command: 01P
Response: 01PS+000123.4 (weight is stable and 123.4) or
01PN (could not print)
Comments: Checks status and it must be stable. Else Nack status will be sent. There is no time period for
stability checking. Status can be Stable or Nack.