PP0132 0611 Supersedes 0410 INSTALLATION, OPERATION, AND MAINTENANCE MANUAL CVSM30, CSM30, CVSM45, CSM45, CST45, CSIM34, CSM60, CSIM68 AUTOMATIC WATER CONDITIONERS FILL IN FOR FUTURE REFERENCE MODEL NO:___________________________________________ DATE INSTALLED:______________________________________ DEALER:______________________________________________ 023366
® remier P P roducts Automatic Water Conditioners WATER TREATMENT SPECIFICATION TABLE Units CVSM30 CSM30 CSM60 CVSM45 CSM45 CST45 CSIM34 CSIM68 Max 30,000 60,000 45,000 30,000 34,000 68,000 Min 18,000 32,000 27,000 18,000 18,000 34,000 Max 15 30 22 15 15 30 Min 6 12 9 9 9 12 GPM 8 12 9 5 10 12 Pipe Size In / Out Inches 1 1 1 1 1 1 Operating Pressure Range PSI 30 - 125 30 - 125 30 - 125 30 - 125 30 - 125 30 - 125 Maximum Operating Temperature Deg
Transformer Premier Products Water Treatment | 95 North Oak St. | Kendallville, IN 46755 | 800-545-2206 | flintandwalling.com Copyright © 2011 Flint & Walling All Rights Reserved. Brine Tank Assembly Brine Line Tubing Typical Water Softener Installation Mineral Tank Assembly Drain Port Manual Inlet Valve (optional) Manual Bypass Valve (Normally Closed) (optional) Drain Trap Cold hard water inlet 30 p.s.i.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT Installation Fitting Assemblies Installation fittings connect to the control valve or the bypass valve using nuts that only require hand tightening. Hand tight nut connections between control valve and installation fittings, control valve and bypass valve, and bypass valve and installation fittings allow for ease serviceability. Do not use a pipe wrench to tighten nuts on installation fittings. Hand tighten only.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT line must not be elevated over 5’ from the top of the softener on well systems, and not over 8’ on municipal water systems. 7. The salt storage cabinet or brine tank is a gravity drain, and this drain line must be lower than the drain fitting on the side wall of the cabinet. 8. Move the softener into position and connect to bypass assembly (if used).
® remier P P roducts Automatic Water Conditioners WATER TREATMENT If the system has called for a regeneration that will occur at the present time of regeneration, the words “REGEN TODAY” will appear on the display. When water is being treated (i.e. water is flowing through the system), the word “Softening” flashes on the display. REGEN TODAY will be displayed if a regeneration is expected “Tonight.” IL1067 STEP 1U STEP 2U AM STEP 3U PM Set Time of Day The user must set the time of day.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT STEP 1I Setting Hardness, Day Override and Regeneration Time STEP 1I: Press NEXT and simultaneously for 3 seconds. STEP 2I STEP 3I STEP 2I - Hardness: Set the amount of hardness in grains of hardness as calcium carbonate per gallon using the or buttons. The default is 20 with value ranges from 1 to 150 in 1 grain increments. Note: The grains per gallon can be increased if soluble iron needs to be reduced.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT Bypass Valve - CSM Series Only The bypass valve is typically used to isolate the control valve from the plumbing system’s water pressure in order to perform control valve repairs or maintenance. The bypass valve is particularly unique in the water treatment industry due to its versatility and state of the art design features.
® remier P P roducts Automatic Water Conditioners 1 023411 8 Transformer 110V - 12V 1 1 Mineral Fill Funnel Service Tool 127001 023362 6 7 1 1 Seal Assy. O-Ring Kit 023409 023410 4 5 1 1 PC Board Piston Assy. 023407 023408 2 3 1 023406 1 Motor Part No. Item No. Description Qty WATER TREATMENT Premier Products Water Treatment | 95 North Oak St. | Kendallville, IN 46755 | 800-545-2206 | flintandwalling.com Copyright © 2011 Flint & Walling All Rights Reserved.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT 16 Injector Cap, Injector Screen, Injector, Plug, O-Ring, Refill and Refill Port Plug, & Drain Line - 3/4” 17 � 18 19 20 23 24 31 25a, 25b 30 32 � 33 34 21 35 � 26 27 28 22 29 Proper flow washer orientation directs water flow towards the washer face with rounded edge. Flow washer indentification numbers must be visible after installation. IL1062 Premier Products Water Treatment | 95 North Oak St.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT 4 1 6 2 3 5 IL1063 Item Description CSM30 CSM60 CSM45 CVSM30 CVSM45 CST45 CSIM34 CSIM68 134803 023319 134800 023319 023319 023319 023483 023356 (2) 023355 023356 136203 023356 023359 (2) 023356 (2) 023359 1 Mineral Tank 134800 2 Mineral 023356 3 Distributor 023361 023487 023361 023360 023360 023360 023360 023488 4 Brine Tank Assy.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT 39 38 37 36 IL1064 Premier Products Water Treatment | 95 North Oak St. | Kendallville, IN 46755 | 800-545-2206 | flintandwalling.com Copyright © 2011 Flint & Walling All Rights Reserved.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT 46 45 46 Connectors 023329 Set of 2 5 49 48 49 48 IL1052 44 Bypass Valve Less Fittings 023328 44 50 50 47 47 41 42 43 41 IL1051 42 43 Premier Products Water Treatment | 95 North Oak St. | Kendallville, IN 46755 | 800-545-2206 | flintandwalling.com Copyright © 2011 Flint & Walling All Rights Reserved.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT Table 15 - Troubleshooting Procedures Problem 1. T imer does not display time of day 2. T imer does not display correct time of day 3. N o softening/filtering display when water is flowing 4. C ontrol valve regenerates at wrong time of day Possible Cause a. b. c. d. a. b. c. a. b. c. d. e. a. b. c. d. e. 5. E RROR followed by code number a. 1001 Error Code - Unable to recognize start of regeneration b.
® remier P P roducts Automatic Water Conditioners WATER TREATMENT Problem 6. C ontrol valve stalled in regeneration Possible Cause a. b. c. d. e. f. g. 7. C ontrol valve does not a. regenerate automatically when b. REGEN button is depressed and c. held 8. C ontrol valve does not regenerate automatically but does when REGEN button is depressed 9. Time of day flashes on and off d. a. b. c. d. e. f. a.
