Owner manual

2
remier
remier
roducts
roducts
P
P
P
P
WATER TREATMENT
®
Automatic Water Filters
Filter Tank
Assembly
Sanitary Drain, Floor Drain or Laundry Tubs are acceptable. Do not make a direct connection to the drain. An air gap must be present.
Cold filtered water inlet 30 p.s.i. minimum pressure 1” minimum pipe size
Maximum drain pipe elevation above drain port is 5 ft.
High Pressure Warning: If feedwater pressure is known to be above 125 psi, it is strongly recommended that a pressure reducing valve be installed at this point.
Unfiltered water to Sprinklers and any dersired unfiltered fixtures
Ground Strap
Filter Water Outlet
Manual Outlet Valve (optional)
110-125 Volt Continuous Power Supply Transformer
Manual Bypass Valve (Normally Closed) (optional)
Manual Inlet Valve (optional)
Drain Port
Drain line 1/2” ID diameter minimum size Connection to sanitary sewer line (optional) Air gap device Sanitary sewer line
Drain Trap
Drain
IL1037
Typical Water CBW Installation