Full Product Manual

INSTALLATION INSTRUCTION
7
STEP 4
SWITCH OFF THE ELECTRICAL MAINS AT
THE CIRCUIT BREAKER FUSE BOX.
1) Connect wires from
controller
to
2) Insert the controller into the
space of the mounting bracket, and
tidy up the wiring.
STEP 5
1) Carefully push the canopy to the
bottom of the mounting bracket,
make two sliding holes aligned to the
two prominent screws on the
mounting bracket, and then turn
clockwise until tight.
2) Push the canopy ring to the
bottom of the canopy, slide the inner
holes aligned to the two prominent
screws on the mounting bracket
again, and turn the canopy ring
clockwise until tight.
power supply with wire connectors.
Canopy
Canopy Ring
Controller
Neutral (White)
Live (Black)
Earth (Green/Yellow)
MOTOR U
FOR LIGHT L
FOR LIGHT N
G
MOTOR W
MOTOR V
AC IN N
AC IN L
Controller
Hanger Ball
G
Light
Fan
mounting bracket